电子技术员英文自我评价（精选6篇）
I graduated in July 20xx, Liaoning Engineering University Civil Engineering (civil engineering) professional, has been working for a year now, in this short period of time more than a year I learned a lot of schools can not learn the knowledge, Vision, improve the professional and technical level and ability to work.
After graduation, I worked at a China Railway Tunnel Group Co., Ltd., in the construction of the Tianma Mountain Tunnel in the technical work. More than a year since both the theoretical knowledge or practical ability has been greatly improved. After taking part in the work, I found that my previous knowledge was helpful, but it was not enough to apply it to my work and it was very difficult to practice because of my own lack of work experience in construction. But I still hope for the job, in order to be able to adapt to the new environment as soon as possible for new jobs. I decided to start from scratch, I went to the site to participate in training, and field workers to work together to learn from the workers on-site experience.
Active and on-site personnel communication, and constantly to the scene of experienced workers master learning, continue to accumulate, extensively absorb all kinds of "nutrition." And continue to learn professional knowledge, learning technical specifications, repeated research design, and actively communicate with colleagues to the site leadership study, through continuous work practice, increased their professional knowledge, but also improve their practical ability, the theory and practice of organic The combination of together. I have now been able to complete the daily work of the tunnel technology independently, such as self-inspection of the tunnel construction process, technical management and guidance of the tunnel construction site, tunnel construction industry information and communication and coordination with all aspects of work.
In this year not only my ability to work with the technical level has been greatly improved, my ideological consciousness has also been further sublimation.As a party member, I worked hard every day at the construction site. I experienced hardships such as hardship, fatigue, loneliness and loneliness. I could say that the dedication of the party supported me in my hardships and hardships. , Throwing blood cast a golden iron in the brand. In working with the workers I found that most of them hard working, work diligently, from no complaints, this spirit of selfless dedication to me a great touch. In the exchange and everyone I learned how to face difficulties, how to behave, and establish a correct outlook on life, values.
In the future work, their own to strengthen learning, to overcome shortcomings, and strive to make their professional and technical level can continue to improve. At the same time, I clearly understand that in order to adapt to the new situation of social development, we must continue to strengthen the theoretical study, especially new technology, new theory of learning, hard work, practice and growth in practice, accumulate work experience, improve Business skills and work for the company's development to make their own new and greater contributions.
I entered the school training for many months, and now immediately graduated, I deeply understand that I need to experience, there are many, many. During this time, I have made great progress in all aspects through the unremitting efforts of teachers and colleagues under the careful care and guidance. I have tried to combine theory and practice with practice and communication with colleagues to consolidate their knowledge. At the same time, I feel more sense of responsibility, many look at the relatively small details can affect the overall situation. At the same time I learned not to despise any small problem.
All along, I actively participate in various political and ideological learning activities organized by the school. Through continuous learning, to make their own ideological and theoretical literacy has been further improved, ideologically firmly established the wholeheartedly serve the people of life, values. The spirit of diligence and dedication of professional ethics is the smooth development of each work and the ultimate guarantee of success.Since this time, I have been enthusiastic and active, serious and meticulous to complete each task, study hard, try to work familiar, and in-depth understanding and establish their own knowledge; strict compliance with the rules and regulations, conscientiously perform their duties,Consciously operate according to specifications; not to participate in illegal activities, and consciously resist the erosion of a variety of adverse atmosphere.
In the future, I will carry forward the achievements to overcome the shortcomings, in the following direction:
1, learning no mirror, the rapid development of the times, a variety of disciplinary knowledge with each passing day. I will make unremitting efforts to learn a variety of theoretical knowledge, and used to guide practice, in order to better adapt to the needs of industry development.Love and respect their jobs, love the cause of power, establish lifelong ideas for the cause of power services, and consciously abide by the code of electrical workers, abide by the law, abide by the power industry and the enterprise rules and regulations. Efforts to complete the task, conscientiously perform their duties, give full play to the individual role. And constantly strengthen their own culture, business learning, and strive to improve the ability and level of work, work from small to start, from the most basic start. Strengthen the "three security" ideology, put an end to illegal, to ensure the realization of production safety. Pay attention to personal image, safeguarding the interests of enterprises, civilized production, civilization and others, civilized do everything.
2, skilled master a variety of business skills in order to better work, I will see more, more learning, more practice to continuously improve their business skills. Based on their positions, conscientious, take seriously every work, do everything. Conscientiously study and study all kinds of equipment drawings, encountered puzzling place, seriously pondering until the understanding so far. Equipment management and strict implementation of the "two votes, three systems" diligent inspection, seriously in place, pay attention to observe the equipment and its operating conditions, in learning by doing, continue to accumulate work experience and equipment defect analysis and incident handling capacity, Their own theoretical knowledge and the actual full contact, master the job technical knowledge.
3, "industry expertise in the ground and shortage in the play," practice is the basis for continuous progress. I want to sum up experience through practice, to improve their ability to solve practical problems, and in the course of practice slowly overcome impatience, positive, enthusiastic treatment of every job.
In short, through school training, let me understand that learning allows us to grow, let us work, people's life is to learn from each other, continuous innovation, the only way to continue to grow and progress in order to continuously enrich the knowledge in order to better work , For the future path of life has laid a good foundation. At the same time to get to know a friend, distinguish between right and wrong, clear direction, firm confidence. We only continue to work, continuous learning will survive, or even better development. I believe in the continuous consolidation of professional knowledge, and repeated learning, I will continue to improve themselves in all aspects, so that their work with the future better integrated together.
Since the company in August 1999 I was awarded the title of the technician to the present, has been four years time. In these four years, I have been in the operation department, by virtue of their own efforts and leadership to help, from a main duty officer promoted to the duty chief, and was promoted to the post of assistant. During this period, I have our first station of the system have a better understanding and awareness of some of the various types of accidents have a certain degree of independent analysis and processing capabilities, a technician to do a good job duties .
My major in the school of thermal and automation control professional, but in the first station to run our work is most in need of heat, electrical and other aspects of knowledge. This is for me a new challenge, but also the need for continuous learning to improve, so that their professional skills can be fully developed. So, I got some books about these areas, targeted to our system of learning, but also ask some of the old master and professionals, ask them to show up preaching. Through their own efforts and the help of colleagues, finally work pays off, my professional knowledge and professional skills have been greatly improved.
But I have a lot of knowledge about the thermal aspects of our system and are particularly interested in it and have a thorough understanding of it.While at the same time learn from their own, but also assume responsibility for preaching to other operational personnel. Our company's hot water network project is the use of computer monitoring system to achieve hot water production and operation of the comprehensive monitoring of the data. Its main components include the controller, input and output modules and monitoring stations. Our company has 18 sets of SCAN3000 / S9000 distributed control system (DCS), which has the functions of hot water network operation loop control, data acquisition, data communication, centralized information management And operation display functions. It is equipped with two S9000 controllers, and another 12 single-loop controller (Honewell UDC3300), as the control loop redundancy controller and emergency hand terminal. UDC as a backup hand-held device can DCS in the event of failure, the control loop to control. With easy to operate, programmable, high stability characteristics.
DCS system and UDC can achieve between the non-disturbance switch, to ensure the stability of the system operation. S9000 controller through the DVC communication port of the DMC communication circuit and single-loop controller to achieve communication; through the MGTSTA communication port and the system monitoring station communication card connected. With these control systems, usually a variety of parameters of the regulation and personnel labor will have a multiplier effect. These control systems are made up of measuring elements (temperature transmitters, pressure transmitters, differential pressure transmitters), control elements (S9000, UDC), actuators (regulators, etc.). Control flow is such that the scene collects data from a meter, the transmitter sends 4-20mA signal to the S9000 (that is often said DCS), 1-5V signal to the UDC. And then issued by the S9000 or UDC 4-20mA signal (UDC series with 250Ω resistor, 1-5V signal to 4-20mA signal) to adjust the actuator. In this process, the instrument's power supply from the two Siemens 24V DC power supply (the two power supply each other spare), the power to the distributor, and then by the electrical distribution to a primary meter power supply (the middle of electrical distribution in order to meter repair , Will not have a short circuit, and damage the DC power supply). DCS or UDC receives the signal that is displayed on the CRT or UDC own screen. DCS or UDC control signal to the impedance converter, distributor, the isolation module or isolated relay relay to the executive control.
Isolation module is through the analog signal, that is, continuous control signal 4-20mA, such as the valve opening, level control; and isolation relay is the switch signal to the DCS, such as temperature switches, pressure switches and pumps Start, stop state, etc. (plus isolation module, isolation relay is to isolate strong signals, so as not to S9000 in the loop control card burned).
During the shift, as a monitor, I assume the responsibility of the entire hot water network security and economic operation, the spirit of a high degree of concentration during work, leading the team members carefully adjust the parameters, careful analysis of the data, sum up the law, Found that equipment defects and risks, to prevent the expansion of the accident. Not only to ensure the safe operation of the hot water network, but also to the economic operation. In some parameters and equipment anomalies, can do a timely analysis, find out the reasons and report, with a certain degree of independent analysis. Usually go to work, often carefully study a variety of professional knowledge and operating procedures, and can often do a good job in the minds of various accidents expected. In the first station when various types of accidents, can be accurate and decisive for processing and scheduling, and quickly restore the normal operation of the system. During the operation of the Office of the Ministry of Operations, I not only assume the daily operation of the Department of Management, logistics, but also bear the auxiliary operational personnel to make the safe and economic operation. And the sector leaders to make the data with the economic analysis and load forecasting, to participate in the analysis of the accident, the system of technological transformation and so on. Such as: the first stop CRT display large network backwater pressure value is often high during the day and often need to turn on the water, after a few days of observation statistics, have this phenomenon, self-examination first station no problem, the analysis may be a user station exists Leak, the pressure during the day when the pressure is greater than our pipe network pipe leakage to our network.
Four years of college, I study hard, proactive, and achieved good results, the average score in the class ranked the top five, and many scholarships.Professional courses among the best, such as the main course "analog electronic technology" in the whole eight classes in the first place to get good grades. But this is not my expertise, theory and practice of combining learning for the use is what I am after.
I love the application of electronic professional and put a great enthusiasm, which five years (two years of secondary school, three years of college are electronic professional), I have been 'a multi-skilled, comprehensive development' to strict demands on themselves, hard work Hard work, hard to learn, practical and systematic learning a variety of basic course knowledge, and achieved excellent results.
Professional knowledge: a solid theoretical foundation, more proficient in professional knowledge, have a strong ability to comprehend and self-learning ability to use a variety of instruments, can carry out circuit analysis, through the various courses and practice-related exercises and spare timeOften making a variety of circuits and maintenance of electrical appliances, with a certain degree of experience and hands-on ability to start the computer system maintenance and management of a variety of network architecture have a certain understanding of the windows9x / LAN maintenance and management. On the microcontroller programming has some reading and writing skills, skilled use of various software, such as: office series of office software and circuit design and protel circuit design software, dreamweaver web design software; and to the power system maintenance and management, has passed The electrical assessment and get electrician card.
Ability to work: has served as the squad leader in the class work, a strong sense of responsibility and collective sense of honor, work carefully and met with the recognition of teachers and students.
Behavior thinking: style decent, treat people sincere, can better deal with interpersonal relationships, doing things calm and stable, have a keen insight into life and strong logic analysis ability, can reasonably arrange life and work in the affairs of a good Of life rules and habits.
Other aspects: hobbies, like social activities, play, engage in production, etc., in the ball referee have some interest and ability.
Young may mean lack of experience, but young also means passion and vitality, I am confident that with their own ability and knowledge to overcome difficulties.
I have benefited a lot from this year's hard work and constant learning since I had been working in July of years ago. Here it is necessary to summarize the gains and losses over the past year, to carry forward a good place to improve the inadequacies of the review of the road can be better to see in front of the road.
Character is a prerequisite to determine the value of a person. Not a good moral character, everything else is empty talk. So this year I insist on regular study of Marxism-Leninism Mao Zedong Thought, to improve their own ideological consciousness. The formation of their own correct outlook on life values. But also actively participate in the school organization of various learning political activities, self-taught a lot of social philosophy, which are very helpful to me, I also worship a great charisma, and has been trying to do it themselves. All in any case, I have not forgotten political learning, and to the moral demands of their own. Usually and teachers live in harmony, work together, learn together, and common progress. At the same time do not forget to help others, helpful people not only can cast a noble character, but also will get a lot of their own interests to help others but also to help themselves.
"Learning for the teacher, behavior world Fan", is that every teacher should follow, is a norm of teacher behavior. This year, I pay attention to their own moral behavior, and strive to give students a good example. Because high school students are in a special stage of learning: the beginning of contact with society, the role of people in society began to gradually understand, this time students can easily imitate the behavior of adults, a lot of bad habits have Many good habits are in this stage to develop, is good or bad with the teacher's words and deeds of the body has a great relationship.This time the teacher is the most direct and easy to learn the object, as a high school teacher, do their own code of conduct for students to establish a good learning model is very important. This is my own requirements.
As a computer teacher, the rapid development of information technology, the rapid development of their own knowledge is very important, do not learn a day, it will lag behind, so since the work, I still continue to learn, did not dare to relax. As soon as I have free time, I will strive to learn information technology-related teaching methods, learning information technology-related technologies. The field of information technology is very extensive, the technology from shallow to deep span is also quite large, a person's knowledge in this ocean is like a dust, in order to better based on society, must continue to increase the depth and breadth of knowledge.This year, I try to expand their knowledge, but also continue to delve into the depth of their own feel a lot of harvest. Of course, this is still not enough, Xuehai knows no boundaries, in the next year, there are more need to learn, and now only sigh too little time, the clock is too fast.
When the teacher for almost a year, although the teaching method is not very mature, but I have learned a lot in teaching. In this year, I served as a year seven classes of information technology teaching, one six classes of vice class, and is responsible for school computer maintenance, electronic reading room management, work is more substantial. I often think about the teaching methods of information technology, the design of teaching methods, and whether this design can make students more receptive. I also understand their own knowledge does not mean that teaching is good or bad, teaching is a meticulous work, but also skilled work. So I think the importance of teaching and research in teaching is even higher than their own learning, and I have been spending more time in teaching and research, not months of teaching and research activities as I learn other teachers experience a good time to actively participate in Each of the teaching and research activities, each event I feel a lot of benefit. As the old saying goes, it is better to delegate to fish than to fish, but it is easier said than done, and it will take some effort. I think teaching students how to learn is the most important, so every teaching, I try to move closer to this, and strive to teach students how to self-study, how to choose meaningful learning. At the same time, also did not forget to knowledge education and emotional attitudes, values combine to cultivate the new century qualified middle school students.
Of course, this year I have a lot of deficiencies, for example, as a teacher, I did not spend more time to in-depth students, students, I think this is not enough, the saying goes, to know ourselves, can only win, Want to better do a good job teaching, students should be in-depth understanding. Also, the lack of new information technology teaching materials. This will be my next year's improvement direction, strive for better in all aspects.
I am engaged in maintenance for three years, proficient in soldering iron technology, hot air gun technology, skilled analysis of electronic circuits to explain, familiar with the introduction of new products into the maintenance work flow and maintenance of all types of electronic products and abnormal analysis work can deal with abnormal production line And can analyze and complete the maintenance report. Work hard, practical, meticulous and patient, self-motivated, hands-on ability, diligent in thinking and summarizing, creative; can Chikunailao, a strong organizational skills and team spirit; cheerful, warm, Adapt to the environment and strong, easy to interact with people. I am warm and open-minded, can quickly adapt to the new environment, learn new knowledge, master new skills. Give me a chance, I will use my practical actions to prove your choice, I believe your trust and my strength can bring us a common success!
I am honest and cheerful, diligent and pragmatic, have a strong ability to adapt and coordination, responsibility
Strong team spirit, responsible for the work will pay all the energy and enthusiasm to develop well-planned, and strive to reach the target in the shortest possible time; the same time, the team will be able to communicate with each other, Like challenges, in a relatively short period of time to adapt to high-pressure work.